50 Disassembly and assembly
96. Remove push rod (109).
97. Remove capture nut (111) from fuel injector
(110) and disconnect the wiring harness.
98. Disconnect clamp (112).
99. Remove holder mounting bolt (113) and then
remove fuel injector assembly (110).
a Insert small L-bar [2] under connector
(CN) of fuel injector (110) and pry off fuel
injector (110) slowly.
a Never hold and pull out the solenoid valve
on the top of fuel injector (110) with pliers,
etc.
PC800, 850-8
100.Loosen locknut (114) and adjustment screw
(115).
101.Remove crosshead assembly (116).
102.Remove mounting bolts (117) and auxiliary
bolt.
103.Remove cylinder head assembly (118).
4
Cylinder head assembly: 25 kg
104.Remove cylinder head gasket (119).
SEN01054-01
15