Komatsu Galeo PC800-8 Shop Manual page 935

50 Disassembly and assembly
Installation
1. Referring to removal steps 4 and after in
"Removal and installation of cylinder head
assembly", install the removed parts up to the
air intake manifold.
Carry out the following installation in the
q
reverse order to removal.
a When installing the parts, observe the precau-
tions described in "Removal and installation of
cylinder head assembly".
[*1]
Procedure for installing fuel injector wiring
harness assembly
a It is difficult to install the connector having
the O-ring from inside.
1) Remove O-ring (23) and take wiring har-
ness connector (22) out of the connector
insertion opening.
2) Fit O-ring (23) and apply engine oil
(SAE30) to its outside.
3) Install connector holder (24) and push it
in.
4) Fix connector holder (24) with mounting
bolt (17).
PC800, 850-8
SEN01054-01
25