Komatsu Galeo PC800-8 Shop Manual page 900

SEN01053-01
Installation
Carry out installation in the reverse order to
q
removal.
[*1]
MIKALOR clamp
a Use a new MIKALOR clamp.
1) Set the hose to the original position.
(Insertion depth of air hose: 80 mm)
2) Set the bridge (BR) under the clamp bolt
and lap it over band (BD) at least (b)
reaches 5 mm.
3) Tightening of the clamp.
a Do not use an impact wrench.
2
Clamp bolt (BC): Lubricating oil
(THREEBOND PANDO 18B)
When reusing the hose
q
Install the clamp to the clamp mark
made on the hose.
3
Clamp bolt (BC):
When using a new hose
q
Tighten until dimension (BDG) is 7 –
10 mm.
16
Min. 6 Nm {0.6 kgm}
50 Disassembly and assembly
PC800, 850-8