Komatsu Galeo PC800-8 Shop Manual page 434

SEN00914-02
2. Application for start of use
a The application for start of use is allowed
only after the terminal station opening in-
spection has been successfully ended.
1) Concerning the machine body for which the
station opening inspection has been com-
pleted, report the following information to
the person responsible to operation of KOM-
TRAX.
(1) Information of the machine body for
which the station opening inspection
has been completed (machine model,
model number and serial number)
(2) Part number and serial number of
KOMTRAX terminal
(3) The service meter reading when KOMTRAX
terminal was installed (in 0.1 h unit)
2) The person responsible to operation of
KOMTRAX shall register the machine body
using the KOMTRAX client PC.
a See "KOMTRAX administrator manual"
for the procedure.
a Above completes the necessary opera-
tions.
4
30 Testing and adjusting
PC800, 850-8