Komatsu Galeo PC800-8 Shop Manual page 415

30 Testing and adjusting
Code
No.
04502 Monitor Input 3
20216 ECM Build Version
20217 ECM CAL Data Ver
18900 ECM Internal Temp
20400 ECM Serial No
20200 Monitor Prog. Version
20212 Pump Con. Prog. Version
* Monitoring codes "18000" and "18001" are not applied to the following machines.
• PC800-8: 55001 and up
• PC850-8: 10007, 55001 and up
a As the unit of display, one of "SI unit system", "Metric unit system", and "Inch unit system" can be selected.
a The unit of display can be changed with "Unit" in the "AAAA/ Default" function of the Service Menu.
a "CA" of the unit of display denotes the crankshaft angle.
Note 1: The momentary Fuel Consumption Ratio shown above is the theoretical fuel consumption ratio (Since it
is a theoretical value, it is a little different from the actual fuel consumption ratio).
Note 2: The Fuel Consumption is the theoretical fuel consumption amount after the engine is started until the
engine is stopped (Since it is a theoretical value, it is a little different from the actual fuel consumption
amount).
PC800, 850-8
Monitoring item
Swing Brake Sw.
Bzzr Cancel Sw.
Window Limit Sw.
W Limit Sw.
Upper P Limit Sw.
Lower P Limit Sw.
(Not displayed when
1 wiper is used)
Unit (Default: ISO)
ISO meter inch
Display of ON/OFF
Display of ON/OFF
Display of ON/OFF
Display of ON/OFF
Display of ON/OFF
Display of ON/OFF
— — —
— — —
°C °C °F
— — —
— — —
— — —
SEN00913-02
Remarks
21