Komatsu Galeo PC800-8 Shop Manual page 386

SEN00912-02
4) Run the engine at high idling and measure
the oil leakage through the measurement
ports according to the following procedure.
a When inspecting ports A, B, C and D, re-
lieve the travel motor slowly in the re-
volving direction (See the table on the
previous page).
a When inspecting port P, set the travel
speed shifting switch in the Hi position.
a Start measuring the oil leakage after 1
minute and measure for 1 minute.
20
30 Testing and adjusting
PC800, 850-8