4.7.3
Installing an S120 Combi Power Module
Installation steps
1. Mount the self-clinching flush head studs M6.
2. Install the S120 Combi Power Module.
3. Firstly tighten the M6 nuts by hand (0.5 Nm).
4. Tighten the nuts in the specified sequence (1 to 4) with 10 Nm.
Figure 4-19
Installing an S120 Combi Power Module
SINAMICS S120 Combi
Manual, 11/2017, 6SL3097-4AV00-0BP7
S120 Combi Power Modules
4.7 Installation
95