X100 Drive-Cliq Interface - Siemens SINAMICS S120 Equipment Manual

Control Units, Control Unit Adapters and operating components
8.3 Control Unit CU310-2 PN (PROFINET)
Figure 8-4
8.3.2.4

X100 DRIVE-CLiQ interface

Table 8- 6 X100 DRIVE-CLiQ interface
Pin
1
2
3
4
5
6
7
8
A
B
Connector type DRIVE-CLiQ socket
The blanking cover for the DRIVE-CLiQ port is included in the scope of delivery.
Blanking covers (50 pieces) Article No.: 6SL3066-4CA00-0AA0
234
Maximum cable lengths depending on the SSI baud rate for SSI encoders
Signal name
TXP
TXN
RXP
Reserved, do not use
Reserved, do not use
RXN
Reserved, do not use
Reserved, do not use
+ (24 V)
M (0 V)
Technical data
Transmit data +
Transmit data -
Receive data +
-
-
Receive data -
-
-
Power supply
Electronic ground
Manual, 06/2019, 6SL3097-5AL00-0BP1
AC Drive