DC link components
6.2 Chassis
6.2.1.10
Installing a Braking Module in a Power Module, frame size GX
180
①
Loosen the two M6 screws.
Remove the front cover to the top.
②
Loosen the two screws from the cover plate at the top and
the M6 nut on the left-hand side.
Remove the cover plate at the left.
③
Loosen the four screws from the cover plate at the top and
the three securing screws at the rear.
Remove the cover plate at the top.
Manual, 06/2019, 6SL3097-5AL00-0BP1
AC Drive