Installing A Braking Module In A Power Module, Frame Size Fx - Siemens SINAMICS S120 Equipment Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

DC link components

Installing a Braking Module in a Power Module, frame size FX

Loosen the two M6 screws.

Remove the front cover to the top.

Loosen the two screws from the cover plate at the top

and the M6 nut on the left-hand side.

Remove the cover plate at the left.

Loosen the four screws from the cover plate at the top

and the three securing screws at the rear.

Remove the cover plate at the top.

Manual, 06/2019, 6SL3097-5AL00-0BP1