X224 Electronics Power Supply; Connection Example - Siemens SINAMICS S120 Equipment Manual

8.5.2.4

X224 electronics power supply

Table 8- 45 X224 electronics power supply
Terminal
+
+
GND
GND
Type: Screw-type terminal 2 (Page 384)
Max. cross-section that can be connected: 2.5 mm
The maximum cable length that can be connected is 30 m.
Note
The two "+" and/or "M" terminals are jumpered in the connector. This ensures that the supply
voltage is looped through.
The current consumption increases by the value for the DRIVE-CLiQ node.
8.5.3

Connection example

Figure 8-17 Connection example, CUA31
AC Drive
Manual, 06/2019, 6SL3097-5AL00-0BP1
Control Units, Control Unit Adapters and operating components
Function
Electronics power supply
Electronics power supply
Electronics ground
Electronics ground
(AWG 14)
2
8.5 Control Unit Adapter CUA31
Technical data
Voltage: 24 VDC (20.4 ... 28.8 VDC)
Current consumption: max. 0.8 A (without DRIVE-CLiQ)
Max. current via jumper in connector: 20 A (15 A
according to UL/CSA)
279