Safety Instructions For Du/Dt Filter Compact Plus Voltage Peak Limiter - Siemens SINAMICS S120 Equipment Manual

7.2.4.2

Safety instructions for du/dt filter compact plus Voltage Peak Limiter

Electric shock in the event of missing touch protection
Touching live components can result in death or serious injury.
• For the dv/dt filters compact plus Voltage Peak Limiter, use touch protection according
Fire through overheating due to insufficient ventilation clearances
Insufficient ventilation clearances can result in overheating with danger to persons as a
result of smoke and fire. Furthermore, an increased number of failures and shorter service
life of the components can occur.
• Maintain 100 mm ventilation clearances above and below the component.
• Always mount the dv/dt filters compact plus Voltage Peak Limiter in a vertical, upright
Burns due to high surface temperature of the dv/dt filter compact
The surface temperature of the dv/dt filters compact may exceed 80 °C. You can be
severely burnt when touching the surface.
• Mount the dv/dt filters compact so that they cannot be touched. If this is not possible, at
NOTICE
Damage to the dv/dt filter compact by using components that have not been released
When using components that have not been released, damage or malfunctions can occur
at the devices or the system itself.
• Only use a dv/dt filter compact that SIEMENS has released for SINAMICS.
NOTICE
Damage to the dv/dt filter compact by exceeding the maximum output frequency
The maximum permissible output frequency when a dv/dt filter compact is used is 150 Hz.
The dv/dt filter compact can be damaged if the output frequency is exceeded.
• Operate the dv/dt filter compact with a maximum output frequency of 150 Hz.
AC Drive
Manual, 06/2019, 6SL3097-5AL00-0BP1
WARNING
to IPXXA or corresponding to the local installation regulations.
WARNING
position, to enable cooling air to flow through the heat sink on the Voltage Peak Limiter
from the bottom to the top.
CAUTION
the dangerous locations, attach an appropriate warning note that is clearly visible and
easy to understand.
Motor-side power components
7.2 Chassis
215