Mounting Dimensions And Tightening Torques - Siemens SINAMICS S120 Equipment Manual

Power Modules
5.2 Blocksize Power Modules (PM240-2)
Note
Installation frame for push through units
An installation frame should be used when push through units are installed in the cabinet.
You can find more information about the installation frame in Section Mounting frame
(Page 358).
This mounting frame includes the necessary seals and frame to ensure compliance with
degree of protection IP54.
If you do not use the mounting frames, you must ensure that the required degree of
protection is complied with using other appropriate measures.
5.2.6.1

Mounting dimensions and tightening torques

The mounting dimensions and the tightening torques for fixing the Power Modules are
specified in the following table.
Table 5- 21 PM240-2 Power Modules, dimensions and tightening torques for mounting
Frame size Height, width, depth
Without shield
connection plate
FSA mm 196 x 73 x 165
inch 7.72 x 2.87 x 6.50
FSB mm 292 x 100 x 165
inch 11.46 x 3.94 x 6.50
FSC mm 355 x 140 x 165
inch 13.98 x 5.51 x 6.50
FSD mm 472 x 200 x 237
inch 18.50 x 7.87 x 9.33
FSE mm 551 x 275 x 237
inch 21.69 x 10.83 x 9.33
FSF mm 708 x 305 x 357
inch 27.87 x 12.01 x 14.06
FSG mm 1000 x 305 x 357
inch 39.37 x 12.01 x 14.06
110
With shield connection
plate
276 x 73 x 165
10.87 x 2.87 x 6.50
370 x 100 x 165
14.57 x 9.94 x 6.50
432 x 140 x 165
16.10 x 5.51 x 6.50
707.5 x 200 x 237
27.85 x 7.87 x 9.33
850 x 275 x 237
33.46 x 10.83 x 9.33
1107 x 305 x 357
43.58 x 12.01 x 14.06
1286 x 305 x 357
50.63 x 12.01 x 14.06
Fastening
3 x M4 studs,
3 x M4 nuts,
3 x M4 washers
4 x M4 studs,
4 x M4 nuts,
4 x M4 washers
4 x M5 studs,
4 x M5 nuts,
4 x M5 washers
4 x M5 studs,
4 x M5 nuts,
4 x M5 washers
4 x M6 studs,
4 x M6 nuts,
4 x M6 washers
4 x M8 bolts
4 x M8 nuts
4 x M8 washers
4 x M10 bolts
4 x M10 nuts
4 x M10 washers
Manual, 06/2019, 6SL3097-5AL00-0BP1
Tightening torque
2.5 Nm (22.1 lbf in)
with
washers
2.5 Nm (22.1 lbf in)
with
washers
3.5 Nm (31.0 lbf in)
with
washers
6 Nm (53.1 lbf in)
with
washers
10 Nm (88.5 lbf in)
with
washers
25 Nm (221 lbf in)
with washers
50 Nm (443 lbf in)
with washers
AC Drive