Siemens SINAMICS S120 Equipment Manual page 294

Control Units, Control Unit Adapters and operating components
8.8 Basic Operator Panel BOP20
BOP20 keyboard
Table 8- 57 Assignment of the BOP20 keyboard
Key
292
Name Meaning
ON Powering-up the drives for which the command "ON/OFF1", "OFF2" or "OFF3"
should come from the BOP.
OFF Power-down the drives for which the "ON/OFF1," "OFF2," or "OFF3"
commands should come from the BOP.
Note:
The effectiveness of these keys can be defined using the appropriate BICO
parameterization (e.g. using these keys, it is possible to simultaneously control
all of the axes that have been configured.)
The structure of the BOP control word corresponds to the structure of the
PROFIBUS control word.
Functions The meaning of these keys depends on the actual display.
Note:
The effectiveness of this key to acknowledge faults can be defined using the
appropriate BICO parameterization.
Parameter The meaning of these keys depends on the actual display.
Raise The keys are dependent on the actual display and are used to raise or lower
values.
Lower
Manual, 06/2019, 6SL3097-5AL00-0BP1
AC Drive