Siemens SINAMICS S120 Equipment Manual page 303

LED Color
Red Continuous
light
Green/re Flashing
d light 0.5 Hz
Flashing
light 2 Hz
Green/or Flashing
ange light
2 Hz
or
Red/oran
ge
AC Drive
Manual, 06/2019, 6SL3097-5AL00-0BP1
Supplementary system components and encoder system integration
Status
This component has at least one fault.
Note:
The LED is activated irrespective of whether the
corresponding messages have been reconfigured.
Firmware is being downloaded.
Firmware download is complete. The system waits for
POWER ON.
Component recognition via LED is activated (p0144=1).
Note:
Whether the LED flashes green/orange or red/orange
depends on the status the LED had during activation
(setting of parameter p0144 to "1").
Description, cause
9.1 Sensor Modules
Remedy
Remove and
acknowledge the fault.
–
Carry out a POWER
ON.
–
301