Mounting Accessories - Siemens SINAMICS S120 Equipment Manual

Figure 9-27
Figure 9-28
Note
Maximum of 4 reuses of screw fastenings
To ensure functional safety, a screw fastening must not be reused more than 4 times.
9.2.4.1

Mounting accessories

Clamp straps and couplings can be supplied as mounting accessories. The clamp straps are
used to fix the encoders with a synchronous flange.
Table 9- 23
Designation
Clamp strap
for encoder synchro flange
(3 items are required)
Spring disk coupling
Shaft diameter:
•
•
Plug-in coupling
Shaft diameter:
•
•
AC Drive
Manual, 06/2019, 6SL3097-5AL00-0BP1
Supplementary system components and encoder system integration
Installation: Clamp flange with slotted hole (not suitable for safety-related applications).
Installation: Hollow shaft
Selection and ordering data
6 mm / 6 mm
6 mm / 5 mm
6 mm / 6 mm
10 mm / 10 mm
9.2 DRIVE-CLiQ encoder
Article No.
6FX2001-7KP01
6FX2001-7KF10
6FX2001-7KF06
6FX2001-7KS06
6FX2001-7KS10
335