Combined Use Of Motion-Connect 500 And Motion-Connect 800Plus - Siemens SINAMICS S120 Equipment Manual

Characteristics for MOTION-CONNECT 800PLUS
The cables can be used in the area below the characteristic. The characteristics represent
the tested operating points.
Acceleration levels for signal and power cables (up to
16 mm²)
11.6.1.6

Combined use of MOTION-CONNECT 500 and MOTION-CONNECT 800PLUS

In principle, MOTION-CONNECT 500 cables and MOTION-CONNECT 800PLUS cables be
used together.
Basic cables and extensions for MOTION-CONNECT cables with RJ45 plug and M12 socket
can be combined without any restrictions.
For the combined use of MOTION-CONNECT cables, the conditions below apply.
Use of DRIVE-CLiQ couplings
DRIVE-CLiQ couplings are used to combine MOTION-CONNECT 500 cables and MOTION-
CONNECT 800PLUS cables. The maximum permissible cable length is calculated as
follows:
Cables with RJ45 connectors:
Cables with M12 connectors:
ΣMC500: Total length of all MC500 cable segments (fixed routing)
ΣMC800PLUS: Total length of all MC800PLUS cable segments (tow chain)
n : Number of DRIVE-CLiQ couplings (0 to max. of 3)
c
With this combination, DRIVE-CLiQ cables with a maximum length of over 75 m can also
implemented for applications involving a tow chain.
Table 11- 8 Examples of maximum cable lengths when using a DRIVE-CLiQ coupling
ΣMC500
(fixed routing)
ΣMC800PLUS
(tow chain)
ΣMC500+
ΣMC800PLUS
AC Drive
Manual, 06/2019, 6SL3097-5AL00-0BP1
87 m 80 m 66 m
5 m 10 m 20 m
92 m 90 m 86 m
Cabinet design and EMC for components, Blocksize format
Acceleration levels for power cables (25 mm², 35 mm² and
50 mm²)
ΣMC500 + 4/3 * ΣMC800PLUS + nc * 5 m ≤ 100 m
ΣMC500 + 4/3 * ΣMC800PLUS ≤ 100 m
54 m 40 m 30 m
30 m 40 m 48 m
84 m 80 m 78 m
11.6 Connection Methods
20 m 10 m 5 m
55 m 63 m 66 m
75 m 73 m 71 m
381