Siemens SINAMICS S120 Equipment Manual page 355

1. Insert the DRIVE-CLiQ cabinet bushing from the outside of the control cabinet through
the cutout in the control cabinet.
2. Attach the DRIVE-CLiQ cabinet bushing to the outer control cabinet panel using 2 M3
screws and 2 nuts. In order to ensure good electromagnetic compatibility, a good
electrical connection must be established between the DRIVE-CLiQ cabinet gland and
the cabinet panel over a large surface area.
①
②
③
Figure 10-6
AC Drive
Manual, 06/2019, 6SL3097-5AL00-0BP1
Control cabinet panel
Screw M3, tightening torque 0.8 Nm (7.1 lbf in)
DRIVE-CLiQ cabinet bushing
Mounting the DRIVE-CLiQ cabinet bushing for cables with RJ45 connector
10.1 DRIVE-CLiQ cabinet bushings
Accessories
353