Working Process Of Injection Molding Machine - Siemens SIJECT 16i Operation Manual

1.3 Working process of injection molding machine

General
SIJECT 16i
Control process
!
SIJECT 16i Operation Manual
The most important components in the injection molding machine are:
Injection unit
—
Mold close unit
—
Electrical and hydraulic control
—
Fig. 1-2 Injection molding machine
Siject 16i is a compact control system. It can be widely used to control
injection molding machine from low end to middle and high end customer.
Please see the manufacturer documentation "SIJECT 16i Start-up" for
detailed information.
The configuration of individual injection molding machine can be different,
but the working process should be implemented in a similar way. Thus we
describe it roughly in the following diagram.
It is provided in the diagram that the Core-in acts before Mold Close Start
or during Mold Close Process, the Core-out acts before Mold Open Start or
during Mold Open Process.
Caution
Other functions not described in the following diagram might be executed
in the control system. It is only for reference.
Introduction
1-5