Juniper MX2010 Hardware Manual page 690

Capacity: 2500 W (maximum 2500 W)
DC output: 362.25 W (7.00 A at 51.75 V, 14.49% of capacity)
PSM 7:
State: Online
AC input: OK (Both feed expected, Both feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 364.00 W (7.00 A at 52.00 V, 14.56% of capacity)
PSM 8:
State: Online
AC input: OK (Both feed expected, Both feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 414.00 W (8.00 A at 51.75 V, 16.56% of capacity)
System:
Capacity:
Allocated power:
Actual usage:
The following output displays the DC chassis power for 2500 W capacity.
NOTE: The capacity of the DC PSM is fixed and is limited by the power feeds as indicated by
the 60 A/80 A switch on the PDM.
user@host> show chassis power
PSM 0:
State: Online
DC input: OK (INP0 feed expected, INP0 feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 627.81 W (12.25 A at 51.25 V, 25.11% of capacity)
PSM 1:
State: Online
DC input: OK (INP0 feed expected, INP0 feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 624.75 W (12.25 A at 51.00 V, 24.99% of capacity)
PSM 2:
22500 W (maximum 22500 W)
6660 W (15840 W remaining)
3280.00 W
674