Juniper MX2010 Hardware Manual page 235

Installing an MX2010 Router Using a Pallet Jack Overview on page 251
Installing an MX2010 Router Using a Router Transport Kit Overview on page 258
7. Ground the router. See:
Grounding an MX2000 Router on page 289
8. Reinstall all components. See:
Reinstalling Components in the MX2010 Router After Initially Installing the Router in a Rack on
page 275
9. Connect cables to the network and external devices. See:
"Connecting the MX2010 Router to Management and Alarm Devices" on page
10. Connect the AC power cord or DC power cables. See:
Installing MX2010 AC Power Supply Modules
Connecting AC Power to an MX2000 Router with Three-Phase Delta AC Power Distribution Modules
on page 291
Connecting AC Power to an MX2000 Router with Three-Phase Wye AC Power Distribution Modules
on page 295
Installing MX2010 DC Power Supply Modules
Installing MX2000 Router DC Power Supply Modules (240 V China)
Connecting Power to a DC-Powered MX2010 Router with Power Distribution Modules (-48 V) on
page 304
Connecting Power to a DC-Powered MX2000 Router with DC Power Distribution Modules (240 V
China) on page 309
11. Power on the router. See:
Powering On a Three-Phase AC-Powered MX2000 Router on page 319
Powering On the DC-Powered MX2010 Router on page 315
12. Perform the initial system configuration. See:
Initially Configuring the MX2010 Router on page 351
RELATED DOCUMENTATION
MX2010 Chassis Description | 7
Routine Maintenance Procedures for the MX2010 Router | 691
MX2010 Troubleshooting Resources | 703
337.
216