Juniper MX2010 Hardware Manual page 495

5. Turn on the power switch to the on (|) position.
6. Verify that the PWR OK LED is lit steadily green.
Figure 243: Installing a DC Power Supply Module
D
SEE ALSO
MX2010 DC Power Supply Module (-48 V) Description | 116
Removing an MX2010 DC Power Supply Module (-48 V) | 475
RELATED DOCUMENTATION
Preventing Electrostatic Discharge Damage to an MX Series Router
MX2010 DC Power Distribution Module (-48 V) Description | 111
MX2010 DC Power Electrical Safety Guidelines
MX2010 DC Power (-48 V) System Electrical Specifications | 201
479