Juniper MX2010 Hardware Manual page 281

To install the router in a four-post rack by using the router transport kit:
1. Install the winch strap plate to the rear of the router by tightening the four captive screws (see
Figure 104 on page 264).
Figure 104: Installing Winch Strap Plate (Four-Post Rack)
2. Using a four-person team, transport the router to the rack installation location and center it in front of
the mounting shelf.
NOTE: A minimum of 38 in. (96.5 cm) of clearance is required to roll the chassis sideways.
NOTE: A minimum of 42 in. (106.7 cm) of circular space is required to rotate the chassis.
NOTE: The router transport kit handles can be removed to accommodate aisle width.
264