Juniper MX2010 Hardware Manual page 34

Center-mounting metal brackets for center-mounting in an open-frame rack (optional).
CAUTION:
point, and place the other end of the strap around your bare wrist. Failure to use an
ESD strap could result in damage to the hardware components.
WARNING:
The chassis with standard cable managers and EMI cover measures 59.50 in. (151.13 cm) high,
19 in. (48.26 cm) wide, and 36.20 in. (91.95 cm) deep (from the front-mounting flanges to the rear of the
chassis). An extended cable manager extends the depth to 40.15 in. (102 cm).
One router can be installed in a 34-U or taller open-frame or four-post rack if the rack can support the
combined weight, which can be greater than 985 lb (446.79 kg).
NOTE: The dimensions also include the cable managers and EMI cover.
Figure 1: Front View of a Fully Configured MX2010 Router Chassis
1
2
3
4
5
Before removing or installing components, attach an ESD strap to an ESD
The router must be connected to earth ground during normal operation.
8