Juniper MX2010 Hardware Manual page 291

Figure 112: Sliding the MX2010 into the Open-Frame Rack
NOTE: A four-person team is needed to carefully guide the router into the rack.
NOTE: There must be a minimum of 45-U of usable rack space when installing the MX2010
into a 45-U rack.
9. Remove the router transport platform, and set the platform aside.
10. Insert twelve mounting screws (six on each side) into the mounting holes to secure the router to the
rack.
11. Visually inspect the alignment of the router. To verify that the router is installed properly in the rack,
see that all the mounting screws on one side of the rack are aligned with the mounting screws on the
opposite side and the router is level.
12. Reassemble the router transport kit, and set aside.
274