Juniper MX2010 Hardware Manual page 115

Figure 31: MX2010 Interface Port Mapping
PORT [0/2]0
PORT [1/3]0
PORT [0/2]0
PORT [0/2]1
PORT [0/3]0
LC 10 11 12 13 14 15 16 17 18 19
PORT [0/3]1
NOTE: The slot number will be different depending on which slot the MPC and MIC is installed.
The show interfaces terse command displays the two 10-Gigabit Ethernet interfaces, xe-9/0/0 and
xe-9/1/0 that correspond to the two ports on the MIC card that is installed in slot 0 of the MPC, and four
10-Gigabit Ethernet interfaces, xe-9/2/0, xe-9/2/1, xe-9/3/0, and xe-9/3/1 that correspond to the four
ports on the MIC card that is installed in slot 1 of the MPC.
user@host>show interfaces terse
...
lc-9/0/0
lc-9/0/0.32769
pfe-9/0/0
pfe-9/0/0.16383
pfh-9/0/0
pfh-9/0/0.16383
xe-9/0/0
xe-9/1/0
lc-9/2/0
lc-9/2/0.32769
pfe-9/2/0
MIC-3D-2XGE-XFP
MIC 0
xe-9/0/0
xe-9/1/0
MIC-3D-4XGE-XFP
MIC-3D-4XGE-XFP
MIC 1
xe-9/2/0
xe-9/2/1
xe-9/3/0
xe-9/3/1
up up
up up vpls
up up
up up inet
inet6
up up
up up inet
up up
up up
up up
up up vpls
up up
92