Juniper MX2010 Hardware Manual page 360

Figure 145: Console and Auxiliary Ports
Figure 146: Console and Auxiliary Cable Connector
Table 88: Console and Auxiliary Ports on the MX2000 RCB
Function No.
1
2
Connecting an MX2010 Router to an External Alarm-Reporting Device
To connect the router to external alarm-reporting devices, attach wires to the RED and YELLOW relay
contacts on the craft interface (see
yellow alarm LED on the craft interface also activates the corresponding alarm relay contact.
Label
AUX
CONSOLE
Figure 142 on page
Description
Connect a laptop, modem, or other auxiliary
unit.
Connect a laptop or console terminal to
configure the MX2000 router.
341). A system condition that triggers the red or
344