Juniper MX2010 Hardware Manual page 464

Issue the following CLI command:
user@host>request chassis fpc slot slot-number online
For more information about the command, see the
Reference.
NOTE:
the FRU gets power, and the system's total power decreases.
To bring a MIC online:
Press the MIC offline/online button until the MIC LED lights green.
Issue the following CLI command:
user@host>request chassis mic fpc-slot fpc-slot mic-slot mic-slot online
For more information about the command, see the
Reference.
The normal functioning indicator LED confirms that the component is online. You can also verify correct
MPC functioning by issuing the show chassis fpc command or the correct MIC functioning by issuing
the show chassis fpc pic-status command.
SEE ALSO
Removing a Cable on an MX2010 MPC or MIC | 444
Preventing Electrostatic Discharge Damage to an MX Series Router
RELATED DOCUMENTATION
Preventing Electrostatic Discharge Damage to an MX Series Router
Replacing an MX2010 MIC | 515
Replacing an MX2010 MPC and Adapter Card | 525
Replacing an SFP or XFP Transceiver on an MX2010 MPC or MIC | 554
Maintaining Cables That Connect to MX2010 MPCs or MICs | 607
When you issue the request chassis fpc slot slot-number online command,
Junos OS System Basics and Services Command
Junos OS System Basics and Services Command
448