Juniper MX2010 Hardware Manual page 689

Issue the show chassis power command to display the information about the AC or DC power system.
The following output displays the AC chassis power for 2500 W capacity.
user@hostshow chassis power
PSM 0:
State: Online
AC input: OK (Both feed expected, Both feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 349.31 W (6.75 A at 51.75 V, 13.97% of capacity)
PSM 1:
State: Online
AC input: OK (Both feed expected, Both feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 325.00 W (6.25 A at 52.00 V, 13.00% of capacity)
PSM 2:
State: Online
AC input: OK (Both feed expected, Both feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 375.19 W (7.25 A at 51.75 V, 15.01% of capacity)
PSM 3:
State: Online
AC input: OK (Both feed expected, Both feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 362.25 W (7.00 A at 51.75 V, 14.49% of capacity)
PSM 4:
State: Online
AC input: OK (Both feed expected, Both feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 364.00 W (7.00 A at 52.00 V, 14.56% of capacity)
PSM 5:
State: Online
AC input: OK (Both feed expected, Both feed connected)
Capacity: 2500 W (maximum 2500 W)
DC output: 364.00 W (7.00 A at 52.00 V, 14.56% of capacity)
PSM 6:
State: Online
AC input: OK (Both feed expected, Both feed connected)
673