Juniper MX2010 Hardware Manual page 248

Figure 80: Router Transport Kit Crate Dimensions
Crate door/ramp
3 ft
(91.44 cm)
3 ft
(91.44 cm)
3 ft
(91.44 cm)
NOTE: The router transport kit is maximally protected inside the shipping crate. Do not unpack
it until you are ready to begin installation.
To unpack the router transport kit:
1. Move the router transport kit shipping crate to an ESD-approved staging area, where you have enough
room to remove the kit for assembly.
2. Position the shipping crate with the arrows pointing up.
3. Remove the metal clips on the shipping crate that secure the top and front to the crate (see
Figure 81 on page 230).
44.5 in
(113 cm)
32 in
(81.3 cm)
36 in.
(91.4 cm)
3 ft
(91.44 cm)
229