Juniper MX2010 Hardware Manual page 277

6. Align the left router transport mounting plate and wheel assembly (indicated by left arrow) with the
holes on the left side of the chassis (see
7. Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router transport mounting
plate and wheel assembly to the chassis.
8. Align the right router transport mounting plate and wheel assembly (indicated by right arrow) with the
holes on the right side of the chassis (see
9. Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router transport mounting
plate and wheel assembly to the chassis.
Figure 101: Installing the Router Transport Kit onto the MX2010 Router
RELATED DOCUMENTATION
Overview of Preparing the Site for the MX2010 Router | 125
Installing an MX2010 Router Using a Router Transport Kit Overview | 258
Figure 101 on page 260).
Figure 101 on page 260).
260