Provisioning Parameters; Provisioning Parameters Overview; Configuration Profile Parameters - Cisco 8800 Series Manual

Provisioning Parameters

•
•
•
•
•
•

Provisioning Parameters Overview

This chapter describes the provisioning parameters that can be used in configuration profile scripts.

Configuration Profile Parameters

The following table defines the function and usage of each parameter in the Configuration Profile Parameters
section under the Provisioning tab.
Parameter Name
Provision Enable
Resync On Reset
Provisioning Parameters Overview, on page 67
Configuration Profile Parameters, on page 67
Firmware Upgrade Parameters, on page 72
General Purpose Parameters, on page 73
Macro Expansion Variables, on page 73
Internal Error Codes, on page 76
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
5
C H A P T E R
Description and Default Value
Controls all resync actions independently of firmware
upgrade actions. Set to Yes to enable remote
provisioning.
The default value is Yes.
Triggers a resync after every reboot except for reboots
caused by parameter updates and firmware upgrades.
The default value is Yes.
67