Cisco IP Phone Configuration
Call Forward
To enable call forwarding, you can enable the feature in two places: on the Voice tab and the User tab of the
phone web page.
Enable Call Forwarding on Voice Tab
Perform this task if you want to enable call forward for a user.
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code. To configure
each parameter, see the syntax of the string in the
240
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Phone.
Step 2
Under Supplementary Services, configure the parameters as described in the
Forward on Voice Tab, on page 240
Step 3
Click Submit All Changes.
Related Topics
table.
DND and Call Forwarding Status
Enable Feature Key
Sync, on page 206
Enable Call Forwarding Status Sync via XSI
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Parameters for Enable Call Forward on Voice Tab, on page
Access the Phone Web Interface, on page
table.
Sync, on page 207
Service, on page 208
Call Forward
104.
Parameters for Enable Call
239