Cisco 8800 Series Manual page 288

Programmable Softkeys
Keyword
bxfer
call (or dial)
call info
calllist
cancel
cfwd
crdpause
crdresume
crdstart
crdstop
conf
confLx
delchar
dir
disp_code
dnd
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
268
Key Label Definition
BlindXfer Performs a blind call transfer (transfers
a call without speaking to the party to
whom the call is transferred). Requires
that Blind Xfer Serv is enabled.
Call Calls the selected item in a list.
Call Info Show call information
Call list Provides access to the call list while on
a connected video call.
Cancel Cancels a call (for example, when
conferencing a call and the second party
is not answering.
Forward / Clr Forwards all calls to a specified number.
fwd
PauseRec Pause recording
ResumeRec Resume recording
Record Start a recording
StopRec Stop recording
Conference Initiates a conference call. Requires that
Conf Server is enabled and there are two
or more calls that are active or on hold.
Conf line Conferences active lines on the phone.
Requires that Conf Serv is enabled and
there are two or more calls that are
active or on hold.
delChar - Deletes a character when entering text.
backspace Icon
Dir Provides access to phone directories.
DispCode Enter Disposition Code
DND / Clr Dnd Sets Do Not Disturb to prevent calls
from ringing the phone.
Cisco IP Phone Configuration
Available Phone Status
Connected
Connected Video
Dialing Input
Progressing
Connected, Connected Video
Off-Hook
Idle, Off-Hook, Shared-Active,
Hold, Shared-Held
Connected, Conferencing
Connected, Conferencing
Connected, Conferencing
Connected, Conferencing
Connected
Connected Video
Connected
Connected Video
Dialing Input
Idle, Miss, Off-Hook (no
input), Connected, Start-Xfer,
Start-Conf, Conferencing,
Hold, Ringing, Shared-Active,
Shared-Held
Idle, Connected, Conferencing,
Hold
Idle, Off-Hook, Hold,
Shared-Active, Shared-Held,
Conferencing, Start-Conf,
Start-Xfer, Connected video