Cisco 8800 Series Quick Start Manual

Your Phone

1
Incoming call or voicemail indicator
2
Camera (Cisco IP Phone 8845 and 8865)
3

Feature and session buttons

4
Softkeys
5
Back, Navigation cluster, and Release
6
Hold, Transfer, and Conference
7
Headset, Speakerphone, and Mute
8
Voicemail, Applications, and Directory
9
Volume
Cisco IP Phone 8800 Series
Feature and Session Buttons
Use feature buttons (left side) to view calls on a line or
access features such as Speed Dial. Use session buttons
(right side) to perform tasks such as resuming a held call.
If you use a locale that reads right to left, the feature and
session button locations are swapped.
Buttons illuminate to indicate status:
Green, steady: Active call
x
Green, flashing: Held call
x
Amber, steady: Private line in use
x
Amber, flashing: Incoming call
x
Red, steady: Remote line in use
x
Red, flashing: Remote line on hold
x
Quick Start Guide

Make a Call

Enter a number and pick up the handset.

Answer a Call

Press the flashing amber line button.

Put a Call on Hold

1. Press Hold .
2. To resume a held call, press Hold again.

View Your Recent Calls

1. Press Applications .
2. Select Recents.
3. Select a line to view.

Transfer a Call to Another Person

1. From a call that is not on hold, press Transfer
2. Enter the other person's phone number.
3. Press Transfer again.

Add Another Person to a Call

1. From a connected call that is not on hold, press
Conference .
2. Enter the other person's phone number.
3. Press Conference again.
1. From a call on hold, press Conference
2. Press Active calls to select a held call.
3. Enter the other person's phone number.
4. Press Conference again.
.
.
June 21 2018