Cisco 8800 Series Manual page 127

Cisco IP Phone Configuration
Parameter Name
User Password
Phone-UI-User-Mode
Description and Default Value
Allows you or the phone user to set or change the password for accessing the phone
web interfaces and the menus on the phone screen.
You can also set or change the user password from the phone screen menu Applications
> Device administration > Set password.
A valid password must contain 4 to 127 characters from three out of the four types:
capital letter, small letter, number, and special character.
In the configuration file (cfg.xml), you can use the User_Password parameter to
bypass the Set password screen that prompts on the first boot or after a factory reset.
For more information, see
Default: Empty
This parameter works only with the user access the (ua) attribute attached to an element
tag in the configuration file (cfg.xml). You can restrict the parameters that the phone
users see on the phone screen.
When set to Yes, you can use the ua attribute to control user access to specific
parameters on the phone screen menu. When set to No, the ua attribute isn't working.
The options for the ua attribute are "na", "ro", and "rw". Parameters designated as
"na" don't appear on the phone screen. Parameters designated as "ro" aren't editable
by the user. Parameters designated as "rw" are editable by the user.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Phone-UI-User-Mode ua="na">No</Phone-UI-User-Mode>
• In the phone web interface, set to Yes and then set the ua attribute of the desired
parameter in the phone configuration file.
Example:
<Phone-UI-User-Mode ua="na">Yes</Phone-UI-User-Mode>
<Enable_VLAN ua="ro">Yes</Enable_VLAN>
<Preferred_Audio_Device ua="rw">Headset</Preferred_Audio_Device>
<Block_ANC_Setting ua="na">Yes</Block_ANC_Setting>
With the settings in the example, the user:
• Can see but can't change the setting of VLAN (
menu
• Can change the setting of Preferred audio device (
• Can't see the menu item Block anonymous call (
phone screen.
Allowed values: Yes|No
Default: No
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Bypass the Set Password Screen, on page
Enable_VLAN
Block_ANC_Setting
Access Control Parameters
108.
) on the phone screen
)
Preferred_Audio_Device
) on the
107