Set Up A Phone For Presence - Cisco 8800 Series Manual

Cisco IP Phone Configuration
Parameter
Queue Status Notification Enable

Set Up a Phone for Presence

You can enable the BroadSoft XMPP directory for the phone user.
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code. To configure
each parameter, see the syntax of the string in the
Before you begin
• Set up the Broadsoft server for XMPP.
• Access the phone administration web page. See
Procedure
Step 1
Select Voice > Phone.
Step 2 In the Broadsoft XMPP section, set the fields as described in the
252.
Step 3 Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Description
Displays the call center status and the agent status.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Queue_Status_Notification_Enable_1_
ua="na">Yes</Queue_Status_Notification_Enable_1_>
• In the phone web page, select Yes to enable this
feature. Select No to disable it.
Options: Yes and No
Default: Yes
Parameters for Set Up Presence, on page 252
Access the Phone Web Interface, on page
Parameters for Set Up Presence, on page
Set Up a Phone for Presence
table.
104.
251