Configure Broadsoft Settings - Cisco 8800 Series Manual

Configure BroadSoft Settings

Parameter
Number Mapping
Configure BroadSoft Settings
The BroadSoft directory service enables users to search and view their personal, group, or enterprise contacts.
This application feature uses BroadSoft's Extended Services Interface (XSI).
To improve security, the phone firmware places access restrictions on the host server and directory name
entry fields.
The phone uses two types of XSI authentication methods:
• User login credentials: The phone uses the XSI user id and password.
• SIP credentials: The register name and password of the SIP account registered on the phone. For this
Procedure
Step 1
Select Voice > Phone.
Step 2 In the XSI Service section, choose Yes from the Directory Enable drop down list box.
You can also configure this parameter in the configuration file (cfg.xml) by entering a string in this format:
<Directory_Enable ua="na">Yes</Directory_Enable>
Step 3
Set up the fields as described in
Step 4 Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
302
Description
With the LDAP number mapping, you can manipulate the number that was retrieved
from the LDAP server. For example, you can append 9 to the number if your dial plan
requires a user to enter 9 before dialing. Add the 9 prefix by adding (<:9xx.>) to the
LDAP Number Mapping field. For example, 555 1212 would become 9555 1212.
If you do not manipulate the number in this fashion, a user can use the Edit Dial feature
to edit the number before dialing out.
Leave this field blank if not needed.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<LDAP_Number_Mapping ua="na"><:9xx.></LDAP_Number_Mapping>
• In the phone web interface, enter the mapping number.
Default: Empty
method, the phone can use the XSI user ID along with the SIP authentication credentials for the
authentication.
Parameters for XSI Phone Service, on page
Cisco IP Phone Configuration
303.