Vertical Service Activation Codes - Cisco 8800 Series Manual

Cisco IP Phone Installation
Specify a Language for the Phone Display
Note Your users can select the language on the phone, from Settings > Device Administration > Language.
Before you begin
The dictionaries and fonts required for the language are set up. See
409
Procedure
Step 1 On the phone administration web page, go to Admin Login > Advanced > Voice > Regional, Language
section. In the Language Selection field, specify the value of the appropriate
Dictionary Server Script field, for the language of your choice.
Step 2
Click Submit All Changes.

Vertical Service Activation Codes

Parameter
Call Return Code
Blind Transfer Code
Cfwd All Act Code
Cfwd All Deact Code
Cfwd Busy Act Code
Cfwd Busy Deact Code
for details.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Specify a Language for the Phone Display
Set Up Dictionaries and Fonts, on page
parameter value from the
dn
Description
This code calls the last caller.
Defaults to *69.
Begins a blind transfer of the current call to the
extension specified after the activation code.
Defaults to *95.
Forwards all calls to the extension specified after the
activation code.
Defaults to *72.
Cancels call forwarding of all calls.
Defaults to *73.
Forwards busy calls to the extension specified after
the activation code.
Defaults to *90.
Cancels call forwarding of busy calls.
Defaults to *91.
411