Cisco 8800 Series Manual page 126

Access Control Parameters
Table 5: Access Control Parameters
Parameter Name
Enable Web Server
Enable Web Admin
Access
Admin Password
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
106
Description and Default Value
Enables or disables access to the phone web interface. Set this parameter to Yes to
allow users or administrators to access the phone web interface. Otherwise, set it to
No. When set to No, the phone web interface isn't accessible.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Enable_Web_Server ua="na">Yes</Enable_Web_Server>
• In the phone web interface, set to Yes to allow the access.
Allowed values: Yes|No
Default: Yes.
Allows or blocks the access to the phone administration pages:
http://<phone_IP>/admin
When set to No, access to the pages is allowed even with the correct password.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Enable_Web_Admin_Access ua="na">Yes</Enable_Web_Admin_Access>
• In the phone web interface, set this parameter to Yes to allow the access.
Otherwise, set it to No.
Allowed values: Yes|No
Default: Yes
Allows you to set or change the password for accessing the phone administration web
pages.
The Admin Password parameter is only available on the phone administration web
page.
A valid password must contain 4 to 127 characters from three out of the four types:
capital letter, small letter, number, and special character.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Admin_Password ua="na">P0ssw0rd_tes89</Admin_Password>
• In the phone web interface, enter the password for administrator access.
Default: Empty
Cisco IP Phone Configuration