Sdp Payload Types - Cisco 8800 Series Manual

Cisco IP Phone Installation

SDP Payload Types

Parameter
G722.2 Dynamic Payload
iLBC Dynamic Payload
iSAC Dynamic Payload
OPUS Dynamic Payload
AVT Dynamic Payload
INFOREQ Dynamic Payload
H264 BP0 Dynamic Payload
H264 HP Dynamic Payload
G711u Codec Name
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Description
G722 Dynamic Payload type.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Try_Backup_RSC ua="na"/>
• In the phone web page, enter an appropriate
value.
Allowed values:
Default: 96
iLBC Dynamic Payload type.
Default: 97
iSAC Dynamic Payload type.
Default: 98
OPUS Dynamic Payload type.
Default: 99
AVT dynamic payload type. Ranges from 96-127.
Default: 101
INFOREQ Dynamic Payload type.
H264 BPO Dynamic Payload type.
Default: 110
H264 HP Dynamic Payload type.
Default: 110
G711u codec name used in SDP.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<G711u_Codec_Name
ua="na">PCMU</G711u_Codec_Name>
• In the phone web page, enter an appropriate
codec name.
Allowed values:
Default: PCMU
SDP Payload Types
361