Configure The Rtp Parameters - Cisco 8800 Series Manual

Configure the RTP Parameters

Parameter
Secondary NTP Server
Configure the RTP Parameters
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > SIP.
Step 2
In the RTP Parameters section, set the Real-Time Transport Protocol (RTP) parameter values as described
in RTP Parameters, on page
Step 3
Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
354
Description
IP address or name of the secondary NTP server used
to synchronize its time.
Perform one of the following:
Default: Blank
Access the Phone Web Interface, on page
355.
Cisco IP Phone Installation
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Secondary_NTP_Server ua="rw"/>
• In the phone web page, enter the IP address of
the secondary NTP server.
104.