Cisco 8800 Series Manual page 104

URL Syntax
Comparison
sip88xx.11-0-0MPP-BN > sip88xx.9-3-1-7MPP-BN
Quoted strings can be compared for equality or inequality. Integers and version numbers can also be
compared arithmetically. The comparison operators can be expressed as symbols or as acronyms.
Acronyms are convenient for expressing the condition in an Open format profile.
Operator
=
!=
<
<=
>
>=
AND
It is important to enclose macro variables in double quotes where a string literal is expected. Do not
do so where a number or version number is expected.
When used in the context of the Profile_Rule* and Upgrade_Rule parameters, conditional expressions
must be enclosed within the syntax "(expr)?" as in this upgrade rule example. Remember that BN
means Build Number.
($SWVER ne sip88xx.11-0-0MPP)? http://ps.tell.com/sw/sip88xx.11-0-0MPP-BN.loads
Do not use the preceding syntax with parentheses to configure the Resync_Trigger_* parameters.
URL Syntax
Use the Standard URL syntax to specify how to retrieve configuration files and firmware loads in Profile_Rule*
and Upgrade_Rule parameters, respectively. The syntax is as follows:
[ scheme:// ] [ server [:port]] filepath
Where scheme is one of these values:
• tftp
• http
• https
If scheme is omitted, tftp is assumed. The server can be a DNS-recognized hostname or a numeric IP address.
The port is the destination UDP or TCP port number. The filepath must begin with the root directory (/); it
must be an absolute path.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
84
Alternate Syntax Description
eq equal to
ne not equal to
lt less than
le less than or equal to
gt greater than
ge greater than or equal
to
and
Cisco IP Phone Provisioning
Applicable to Applicable to
Integer and Version Quoted String
Operands Operands
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
Yes Yes