Server-Configured Paging; Configure Multicast Paging - Cisco 8800 Series Manual

Cisco IP Phone Configuration
Parameter
PRT Max Timer
PRT Name

Server-Configured Paging

You can configure a paging group on a server so that users can page a group of phones. For more details,
refer to your server documentation.

Configure Multicast Paging

You can set up Multicast paging to allow users to page to phones. The page can go to all phones or a group
of phones in the same network. Any phone in the group can initiate a multicast paging session. The page is
received only by the phones that are set to listen for the paging group.
You can add a phone to up to 10 paging groups. Each paging group has a unique multicast port and number.
The phones within a paging group must subscribe to the same multicast IP address, port, and multicast number.
You configure the priority for the incoming page from a specific group. When a phone is active and an
important page must be played, the user hears the page on the active audio path.
Description
Determines at what interval (minutes) the phone starts generating
problem report automatically.
If PRT Max Timer and PRT Upload Rule fields are empty, problem
reports are not generated.
Perform one of the following:
Valid value range: 15 minutes to 1440 minutes
Default: Empty
Defines a name for the generated PRT file.
Perform one of the following:
Default: Empty
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<PRT_Max_Timer ua="na">30</PRT_Max_Timer>
• In the phone web page, enter the interval duration in minutes.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<PRT_Name ua="na">prt-string1-$MACRO</PRT_Name>
Enter the name in the format:
prt-string1-$MACRO
• In the phone web page, enter the name in the format:
prt-string1-$MACRO
Server-Configured Paging
181