Cisco 8800 Series Manual page 279

Cisco IP Phone Configuration
Parameter
Company UUID
Primary Request URL
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Parameters to Make an Emergency Call
Description
The Universally Unique Identifier (UUID) assigned
to the customer by the emergency call services
provider.
For example:
07072db6-2dd5-4aa1-b2ff-6d588822dd46
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Company_UUID_1_ ua="na"/>
• In the phone web page, enter a valid identifier
assigned by the call services provider.
Valid Values: Maximum identifier length is 128
characters.
Default: Blank
Encrypted HTTPS phone location request. The request
uses the phone IP addresses, MAC address, Network
Access Identifier (NAI), and chassis ID and port ID
assigned by the network switch manufacturer. The
request also includes the location server name and the
customer identifier.
The server used by the emergency call services
provider responds with an Emergency Response
Location (ERL) that has a location Uniform Resource
Identifier (URI) tied to the user phone IP address.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Primary_Request_URL_1_ ua="na"/>
• In the phone web page, enter encrypted HTTPS
phone location request.
For example:
h t t p s : / / p r o d . b l u e e a r t h . c o m / e 9 1 1 L o c a t e / h e l d / h e l d _ r e q u e s t . a c t i o n
Default: Blank
259