Cisco 8800 Series Manual page 189

Cisco IP Phone Configuration
Macro Name
SWVER
HWVER
PRVST
UPGST
UPGERR
PRVTMR
UPGTMR
REGTMR1
REGTMR2
UPGCOND
SCHEME
METH
SERV
SERVIP
PORT
Macro Expansion
Software version string; for example, 2.0.6(b). Use the software version string to
compare against the current phone's firmware load, with one of the following methods:
• With quotes, "$SWVER"–Variable acts as a string in firmware load name
comparisons. For
phone model number and load number are part of the comparison.
• Without quotes, $SWVER–Variable is parsed to determine a build number, plus
major, minor, and micro revision numbers. For example, when the
sip88xx.11-1-1MSR-1dev.loads
firmware names are parsed, the result ignores the model number and load number.
The result for both firmware names yields a major revision=
micro revision=
Hardware version string; for example, 1.88.1.
Provisioning State (a numeric string):
• -1 = explicit resync request
• 0 = power-up resync
• 1 = periodic resync
• 2 = resync failed, retry attempted
Upgrade State (a numeric string):
• 1 = first upgrade attempt
• 2 = upgrade failed, retry attempt
Result message (ERR) of previous upgrade attempt; for example, http_get failed.
Seconds since last resync attempt.
Seconds since last upgrade attempt.
Seconds since Line 1 lost registration with SIP server.
Seconds since Line 2 lost registration with SIP server.
Legacy macro name.
File access scheme (TFTP, HTTP, or HTTPS, obtained after parsing resync or upgrade
URL).
Deprecated alias for SCHEME, do not use.
Request target server hostname.
Request target server IP address (following DNS lookup).
Request target UDP/TCP port.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
"$SWVER" eq "sip8845_65.1-0129-18-0356dev.loads"
and
sip8845_65.11-1-1MSR-1dev.loads
, and build number= .
1MSR 1
Macro Variables
, the
, minor revision= ,
1 1
169