Cisco 8800 Series Manual page 187

Cisco IP Phone Configuration
Parameter
XML User Name
XML Password
CISCO XML EXE
Enable
CISCO XML EXE
Auth Mode
Description
XML service username for authentication purposes.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<XML_User_Name ua="na">username</XML_User_Name>
• In the phone web interface, enter the usename used for authenticating XML
service.
Default: Empty
XML service password for the specified XML User Name. The password you entered
in this field shows in the configuration file (cfg.xml) as
<!--
<XML_Password ua="na">*************</XML_Password>
-->
Default: Empty
Specifies whether authentication is required to access the XML application server.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<CISCO_XML_EXE_Enable ua="na">Yes</CISCO_XML_EXE_Enable>
• In the phone web interface, set it to Yes or No to enable or disable authentication.
Allowed values: No
Default: No
Specifies the authentication mode for Cisco XML EXE. The available options are:
• Trusted—No authentication is performed regardless of the local credential.
• Local Credential—Authentication is based on the digest authentication using the
local credential, if set. If the local credential is not set, then no authentication is
performed.
• Remote Credential—Authentication is based on the digest authentication using
the remote credential as set in the XML application on the web page (to access
an XML application server).
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<CISCO_XML_EXE_Auth_Mode ua="na">Local
Credential</CISCO_XML_EXE_Auth_Mode>
• In the phone web interface, select an authentication mode.
Allowed values: Trusted|Local Credential|Remote Credential
Default: Local Credential
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Parameters for XML Applications
167