Assign A Speed Dial Number - Cisco 8800 Series Manual

Assign a Speed Dial Number

<Extension_2_ ua="na">Disabled</Extension_2_>
Step 4
In the Extended Function field, enter a string in this format:
fnc=sd;ext=9999@$PROXY;nme=xxxx
If you configure a phone with alphanumeric dialing feature in which the phone can place a call with
alphanumeric characters instead of the traditional digits, you can enter a string in this format:
fnc=sd;ext=xxxx.yyyy@$PROXY;vid=n;nme=xxxx
where:
• fnc= sd means function=speed dial
• ext= 9999 is the phone that the line key calls. Replace 9999 with appropriate phone number.
• vid=n is the line index of the phone.
• nme= XXXX is the name displayed on the phone for the speed-dial line key. Replace XXXX with a
You can also configure this parameter in the phone configuration file (cfg.xml). The parameter is line-specific.
Enter a string in this format:
<Extended_Function_2_ ua="na">fnc=sd;ext=9999@$PROXY;nme=xxxx</Extended_Function_2_>
Step 5
Click Submit All Changes.
Assign a Speed Dial Number
You can configure speed dials on the phone with the web interface. The user can see the configured speed
dials on the phone and can use the speed dial number to call the corresponding contact.
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > User.
Step 2 In the Speed Dial section, enter a name in Speed Dial (n) Name and the number in Speed Dial (n) Number
that corresponds to the speed dial entry.
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code. The speed
dial parameters are line-specific. Enter a string in the format
<Speed_Dial_1_Name ua="rw">John Wood</Speed_Dial_1_Name>
<Speed_Dial_1_Number ua="rw">12345678</Speed_Dial_1_Number>
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
150
ext= xxxx.yyyy is the phone that the line key calls. Replace xxxx.yyyy with alphanumeric characters.
You can use these characters for alphanumeric dialing: a-z, A-Z, 0-9, -, _, ., and +.
name.
Access the Phone Web Interface, on page
Cisco IP Phone Configuration
104.