Configure A Speed Dial On A Line Key - Cisco 8800 Series Manual

Cisco IP Phone Configuration
Parameter
Extended Function

Configure a Speed Dial on a Line Key

You can configure speed dial on an idle line of a user phone. The user can then use that line key to speed-dial
a number. When you enable the speed dial on the line key, the user sees the speed-dial icon a name for the
speed dial line key. The user presses the line key to dial the assigned extension.
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > Phone.
Step 2
Select a Line Key on which to configure speed-dial.
Step 3 Set the Extension field to Disabled to disable the extension.
You can also configure this parameter in the phone configuration file (cfg.xml). The parameter is line-specific.
Enter a string in this format:
Description and default value
This field functions only on the line keys with Extension set to Disabled.
Used to assign extended functions to a line key on the phone. The supported functions
are:
• Busy Lamp Field (BLF)
Example:
fnc=blf;sub=BLF_List_URI@$PROXY;usr=user_ID@$PROXY
• BLF with Call Pickup
Example:
fnc=blf+cp;sub=BLF_List_URI@$PROXY;usr=user_ID@$PROXY
• Speed Dial
Example:
fnc=sd;usr=user_ID@$PROXY
• BLF with Speed Dial
Example:
fnc=blf+sd;sub=BLF_List_URI@$PROXY;usr=user_ID@$PROXY
• BLF with Speed Dial and Call Pickup
Example:
fnc=blf+sd+cp;sub=BLF_List_URI@$PROXY;usr=user_ID@$PROXY
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Extended_Function_1_>fnc=sd;ext=user_ID@$PROXY</Extended_Function_1_>
• On the phone web interface, specify the functions that apply to the line key.
Default: Empty
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Configure a Speed Dial on a Line Key
Access the Phone Web Interface, on page 104.
149