Cisco 8800 Series Manual page 74

Profile Resync Parameters
Parameter
Profile
Authentication Type
Profile Rule
Profile Rule B
Profile Rule C
Profile Rule D
DHCP Option To
Use
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
54
Description
Specifies the credentials to use for profile account authentication. The available options
are:
• Disabled: Disables the profile account feature. When this feature is disabled, the
Profile account setup menu doesn't display on the phone screen.
• Basic HTTP Authentication: The HTTP login credentials are used to authenticate
the profile account.
• XSI Authentication: XSI login credentials or XSI SIP credentials are used to
authenticate the profile account. The authentication credentials depend on the
XSI Authentication Type for the phone:
• When the XSI Authentication Type for the phone is set to Login
Credentials, the XSI login credentials are used.
• When the XSI Authentication Type for the phone is set to SIP Credentials,
the XSI SIP credentials are used.
• In the phone configuration file (cfg.xml) with XML, enter a string in this format:
<Profile_Authentication_Type ua="na">Basic Http
Authentication</Profile_Authentication_Type>
• On the phone web page, select an option from the list for the phone to
authenticate profile resync.
Default: Basic HTTP Authentication
Each profile rule informs the phone of a source from which to obtain a profile
(configuration file). During every resync operation, the phone applies all the profiles
in sequence.
If you are applying AES-256-CBC encryption to the configuration files, specify the
encryption key with the --key keyword as follows:
[--key <encryption key>]
You can enclose the encryption key in double-quotes (") optionally.
• In the phone configuration file (cfg.xml) with XML, enter a string in this format:
<Profile_Rule ua="na">/$PSN.xml</Profile_Rule>
<Profile_Rule_B ua="na"/>
<Profile_Rule_C ua="na"/>
<Profile_Rule_D ua="na"/>
• On the phone web page, specify the profile rule.
Default: /$PSN.xml
DHCP options, delimited by commas, used to retrieve firmware and profiles.
Default: 66,160,159,150,60,43,125
Cisco IP Phone Provisioning